This has consequences for working photographers. More channels with more diversity among the channels means more total number of ads but generally driven by the same budget numbers. That means the time and money resources for each ad are reduced. We might be as busy as we ever were but the granular nature of what we're doing means we're moving faster to make the same payday.
I looked at the way we were handling projects like annual reports and one of the things I decided was that we were wasting too much time (and incurring to much liability) by plugging big moonlights into wall sockets and running extension cords across data centers, executive suites and through the farmland of cubicles. I decided to move to a cordless solution for lighting but I still wanted enough power in a single head to power a large soft box and grab good depth of field with lower ISO settings on my cameras.
I looked at some of the premium offerings from companies whose products I'd used extensively in the past. I looked at the battery powered Profoto mono-lights and also the newer, shoe mount lights from this Swedish powerhouse of flash and just laughed. With budgets dropping quarterly and the future moving to video I found the idea of dropping thousands of dollars per flash ludicrous. Laughable.
I was looking at a Godox battery powered mono-light (also available under other brand names) and I was ready to pull together three of them into a system when I found the lights I'm showing above. They are the Neewer (not a typo. I wish spell check would stop trying to correct me...) Vision 4 lithium battery powered electronic flash units.
When I first looked at them they were dirt cheap. About $279 per unit, which included a remote trigger and a Bowens-type, standard reflector+diffusion sock. I took a chance and ordered one.
When it arrived I sat down with the manual and my initial thought was the same one I have when I am confronted with massive feature overload in cameras, cars and on phones. That thought is: I wonder if most consumers would actually pay more for a simplified, easy-to-use, more elegant product? How about a flash with an on/off switch and a knob for power settings?
At any rate I soldiered through the manual amazed that people might actually need a "stroboscopic" mode in a workaday flash unit. Or that they might need to program in a delay for use with red-eye reduction modes on flashes attached to cameras. At a certain point I figured out how to turn off all the extras and master the feature I bought the unit for originally; to flash at a certain power level every time I fire the shutter in my camera.
The unit delivers 300 watt seconds of flash power to a circular flash tube. It uses an almost universally standard Bowens S mount for speed rings and reflectors. The modeling light is an LED located in the center of the flash tube's circle. The unit recycles in about 2.5 seconds when used at full power and in less than a second at half power. In my testing (well over two months) I've found that the unit is very consistent with color and output in even the longest series of flashes. Remember to let the flash fully recycle and you'll be rewarded with exemplary consistency.
The specifications say that we can expect around 700 full power flashes before we run down the battery. I tend to use the unit at half power in order to get faster recycling times and I've never been able to drain a battery over the course of even the longest shooting day. Once you do run down the battery it takes about five hours to recharge. Since the battery has to be removed from the flash to attach the charger there is no capability to run the flash from A/C power while charging. You either buy back up batteries or you remember to fully charge your units before you head out for the day.
The last time I bought replacement, lead acid batteries for my battery powered Profoto Acute 600B they were nearly $300 apiece and would deliver about 250 flashes. The lithium battery for the Vision 4 flash is about $69 and weighs less.
When I shoot corporate portraits I tend to shoot in bursts and I want to make sure my exposures are consistent (after all, I'll be the guy post processing the work....) so I turn on the beeper that signals a full recycle. Whether I actually pay attention to the beeper all the time is a different conversation.
The flash weighs in at just under four pounds, with the battery, and seems to be very well built. The unit comes with a very simple flash trigger and some traditionalist at Neewer even decided that the company should also toss in an old fashion, ten foot sync cord.
The menu is complex and allows you to fine tune the flash to your working methods. You can change the flash duration from 1/1,000th of second all the way up to 10,000th of a second. There is also an FP (focal plane shutter) mode which allows for higher shutter speed syncing with most modern digital cameras. Befuddling to me is the menu for various stroboscopic settings. I ventured into that menu once and couldn't get back out. It was terrifying. Now I bring the owners manual with me.
As I mentioned, I liked the way the unit worked so well that I went back to order another. I was delighted to see that the price had dropped, which made the unit less expensive than the Profoto beauty dish I bought for that system fifteen years ago....
A few weeks ago I glanced at the Amazon page for the Vision Four unit, trying to find little "spill kill" umbrella reflectors. I didn't find the reflectors but immediately noticed that the Vision 4's had dropped in price to $199. I rounded out my system with a third unit and promptly sold off every plug in the wall, flash unit I've accumulated over the decades.
All three units fit into the Manfrotto case I bought to transport things on a video assignment to Oklahoma City. I can fit the three units, reflectors and speed rings into the front side of the case and three light stands, three umbrellas and a small tripod in the other side of the case ---- with room to spare for clean socks and odds n ends.
I have now used the trio of elegant but inexpensive lights on all day portrait ("cattle call") assignments as well as on fast paced advertising assignments; including one assignment that called for freezing the actions of a person jumping on a mini-trampoline. In every regard the units have worked flawlessly. I am happy to have them.
The days of Euro-overkill flash units are over. Dead and buried. Unless you are operating a large and busy studio and are one of a handful of practitioners using medium format (and even large format) cameras; digital or film, the likelihood that a Broncolor system or Profoto system is better for anything other than massaging your ego is remote. There are certain jobs that might require more power than these units can must but once you go beyond 600 watts seconds or so (buy a Godox or similar) you are into specialist territory and probably shouldn't be taking advice from a generalist like me.
My goal is to "right size" my expenditures to match the realities of my clients' budgets. An equally important goal is to be more efficient by bypassing the need to haul extension cords and to find empty plugs in order to get power. I want stuff that works, is portable, easy to operate and is inexpensive to replace if an assistant accidentally drops it off the back of a truck. The Vision 4 does all these things nicely.
On really fast paced assignments; ones on which I am working solo, I still depend on a ThinkTank roller case with a collection of a half dozen camera mountable speed lights and a Ziploc baggie full of remote triggers. But when we are providing high quality images for law and medical practice and lots and lots of advertising agency projects the Vision 4 units are doing a good job filling the bill.
For anything bigger or more complex there's always rental.
Here are some additional images of the lights and the manfrotto case I am using:
Big Manfrotto Case. ( I need one more....).
4 comments:
Re Neewer: Have you tried whatever the Mac equivalent is of right-clicking a supposed typo, and selecting "add to dictionary?" (from Windows user experience, being an Apple ignoramus)
One of my nephews is also a photographers. He went from using his Elinchrom lights to the more compact Godox lights. He haven't complained about them yet.
When I go to the rental house here in Dallas, I'm usually seeking to rent a lens for the weekend I've heard about. I see lots of young people there renting lighting gear. Back in the day, it was mostly lenses that I saw people rent. I say the mix is about half camera gear and half lighting.
"amazed that people might actually need a "stroboscopic" mode"
Ha! I bet that if you pulled out the old technique of using stroboscopic mode on flying birds, modern dancers or other movement artists you would be the toast of Austin and new clients would be pounding down your door.
I thought I was. I thought they were...
Post a Comment